
Subject to optical and technical changes without notice; No liability assumed for setting and printing errors.
ekey TOCA Solution - F1.doc
Call (941) 782-1227 or visit www.ekeyUSA.com
Page
8
3.3 Option 2 - ekey
®
TOCAhome pc
TOCAhome pc has the same function and features as the basic TOCAhome; however this system
provides the following additional functionality through a computer program:
Assign name to users
Assign names to each of the three relays
adjusting relay open time in increments of seconds up to 244 sec
designate one of the three relays to activate when scanner fails to authenticate a user’s
fingerprint
detail audit trail while connected to the computer and limited activity list while not connected to
the computer
This option consists of the following items:
QTY Description Picture
Only 1
per
system
Fingerprint Scanner – (used for enrollment &
authentication)
Is an outside unit that has dual purpose: a) user enrollment; b)
user authentication
Is an outside unit that should be installed in a location that is
visible and easy accessible by users.
The unit is spray-waterproof, and as such the mounting
location should provide adequate protection against heavy rain,
snow showers, and intense sunshine exposure.
To ensure proper operation of the fingerprint Scanner, it should
be installed at the proper height from the ground to the upper
edge of the Scanner (53” for standard scanner; 62” for inetgra
scanner).
The fingerprint scanner is connected to the control unit by 4
conductors (2 data and 2 power). Data and power conductors
should not be run in the same cable. Please refer to the wiring
diagram for more info.
Scanner is available in black that is actually anthracite color.
Also, white color Scanner is available as special order only.
Only 1
per
system
Control Unit - (used for rely control & basic programming)
Is an inside unit that has dual purpose: a) relay control; b)
basic system programming (in addition to the computer
program)
Is an inside unit that is installed away in a separate location
preventing tampering.
The control unit provides 3 contact closures each through
normal open/close relay.
Each of the three relays is
Controlled by different finger that is assigned during the
enrollment process.
Possible to name and adjust opening time.
A single Scanner controls all relays…Only one scanner can
control unit with
different housing
Comentarios a estos manuales