EKey TOCAhome pc Instrucciones de operaciones descargar pdf (Pagina 50)

50

7.6

DESIGN ELEMENT MOUNTING

Installing the

done by snapping it over the integra

finger scanner as follows: using two

fingers, grab the

on the sides from the middle.

and insert the

bottom two notches in the scanner

two bottom holes.

While the bottom edge of the

design element

apply little pressure on the top face

towards the scanner forming a little

curve (avoid bending the plate).

While in this position, align the

notches on the top edge of the

design element

two top holes. Once seated r

your fingers and the

element

is in place.

7.7

DESIGN ELEMENT DISMOUNTING

In order to dismount the design

element, use a flat object (flat

screwdriver or the like) and lift the

design element

carefully, by placing the flat

in-

between the upper or the lower

edge of the plastic housing and the

design element

Installing the

design element is

done by snapping it over the integra

finger scanner as follows: using two

fingers, grab the

design element

on the sides from the middle.

Align

and insert the

design element

bottom two notches in the scanner

two bottom holes.

While the bottom edge of the

design element

is in this position,

apply little pressure on the top face

towards the scanner forming a little

curve (avoid bending the plate).

While in this position, align the

notches on the top edge of the

design element

into the scanner

two top holes. Once seated r

elease

your fingers and the

design

is in place.

In order to dismount the design

element, use a flat object (flat

screwdriver or the like) and lift the

design element

out of the frame

carefully, by placing the flat

object

between the upper or the lower

edge of the plastic housing and the

design element

.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Comentarios a estos manuales

Sin comentarios