EKey Fingerscan Access Control System Instrucciones de operaciones Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 41
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
General
© ekey biometric systems GmbH Operating instructions ekey home Page 35 / 41
8.2.2.10
TEST MODE
The test mode has been particularly designed to run functional tests after the initial installation and for
trouble shooting the system in combination with a suitable locking system. In this mode, you can
manually activate the relay output via the menu of the ekey home CP DRM. This way, you can verify in a
simple manner if the locking system has been wired properly.
1.)
First enter the current security code as per section 8.2.2.4.
2.)
Select “Test Mode” in the main menu using the buttons.
3.)
Press the button.
4.)
Depending on the current operating mode of the ekey home CP DRM relay, you can either activate
or deactivate the relay output. Please use the button for this purpose. Pressing the button
will switch the relay output.
5.)
Press the button to exit the test mode and return to the main menu. While returning from the
test mode, the relay output is deactivated.
DISPLA Y Enter security
code
DISPLA Y KEY STROKE DISPLAY KEY
STROKE
DISPLA Y
Enter
security
code
The re lay is not
active
THE RELAY IS
ACTIVE
Select the menu item
„Test mode
The relay is
active
THE RELAY IS NOT
ACTIVE
START
Press to go back to
the main menu.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

Comentarios a estos manuales

Sin comentarios